Washing machine washing machine electric machine failure?

31 May, 2019

Detection of motor rotation: 1. Check if the resistance value of the motor running and starting winding is normal. For fully automatic washing machine 140W motor is used for 4Kg or less, main winding (yellow blue 28Ω), secondary winding (yellow...

How does the motor's stirring speed change?

24 May, 2019

The speed of the motor is determined by the number of winding groups, such as a 4-pole motor (which refers to a motor with two pairs of magnetic poles). When the frequency is 50 Hz, the rated speed is 1450 rpm. In the case of a certain number of pole...

What is the difference between a motor and a motor?

16 May, 2019

The motor, from the English motor, was transformed by Japanese and passed to China as a motor. Motor is the meaning of movement and maneuvering. Therefore, the motor is very wide. Pneumatic, electric, hydraulic and other electric motors are just one ...

What is the cause of motor overload?

10 May, 2019

(1) The terminal voltage is too low. Refers to the voltage measured at the motor stator lead end when the motor is started or at full load, not the no-load voltage. When the motor load is constant, if the voltage is reduced, the current will increase...

The role of the motor

28 Apr, 2019

The role of the motor: the electrical energy of the battery is converted into mechanical energy, driving the wheel of the electric vehicle to rotate, so as to achieve the purpose of continuous riding of the electric vehicle. When the motor is work...

Future washing machine

19 Apr, 2019

10 common faults of the motor and effective treatment methods

12 Apr, 2019

1: The generator does not operate according to the specified technical conditions. If the stator voltage is too high, the iron loss increases; if the load current is too large, the copper loss of the stator winding increases; If the frequency is too ...

The washing machine motor does not turn

03 Apr, 2019

The most common problem with your problem is the clasp spring problem. During normal washing, the spring should be disengaged. Only when dehydrating, the spring will hold the inner and outer shafts. Since it is not detached from the rust for a long t...